crystal solification machine

Crystal cover making machine Applying to crystal facture production of crystal frame , crystal album cover , decorative paintin

crystal cover making machine

characteristics:

 This machine adopts thermostatic CNC and automatic timer device

Built-in forced hot circulatory system and air filtration system

Heating even, the drying speed is fast (if 45 degrees,4—5hours is enough)

Once can finish 20 album cover and photo board

Finished production are no bulbs,no waviness high brightness,long-term storage and no misshape

Save time and energy

Specification/features:

 Applying to crystal facture production of crystal frame , crystal album cover , decorative painting and other panels

1,You can use this machine to make korean crystal cover.

2,The machine is easy to operate.

3,Width*length*high:85cm*131cm*170cm

The gross weight is 200kg.

  

Usage Directions:

Firstly: Install

1.  Put machine in a clean, dust - free spaces; Open front door and put stainless steel tube on both sides of the oven's support.

2.  Adjust the screw at the bottom to make tube horizontal.

3.  Connect power line with 220V power supply

Secondly: Usage

1.  Stick photo to back panel(Wood board) with white emulsion or double side adhesive tap

2.  Press the power switch;

3. Set the temperature on the machine panel at 45°C---55°C, set the time in 3---6 hours

“S” means second, ”M” means minutes, “H” means hour

4.  Open the lighting button

5.  Distribute A/B glue proportional(3:1)well and then mix glue

6.  Use cotton cloth to clean the back panel; Pour mixed crystal AB glue to panel(from outer part to inner part)

7. Put the panel into this machine. When time is ok, take out it.

 

crystal solification machine